Mes devis

Il n'y a aucun produit dans votre devis

» Voir tous mes devis.

RackMatrix® Solution pre-installed Issabel with OpenVox FXO/FXS/BRI/PRI modular board and GX-412TC 1 Ghz quad core system board
* non-contractual pictures

Modular FXO/FXS/BRI/PRI IPBX PoE with Issabel pre-installed software

  • Pre-installed Issabel software
  • Modular PBX 8 channels FXO/FXS/BRI/PRI
  • 8 ports PoE 10/100 Mbps switch
  • Up to 200 users
  • AMD GX-412TC 1 Ghz quad core
  • 3 Gigabit Intel (i211AT) ports
  • 2 Gb DRAM

More details

New product

More info

Issabel PBX, the first association of a modular FXO/FXS/BRI/PRI OpenVox X204E card, 8 ports PoE 10/100 Mbps switch and a PC Engines AMD GX-412TC 1 Ghz Quad core system board with 3 Ethernet Gigabit ports, all integrated within a 19" enclosure of high quality with the pre-installed Issabel 4 software, this is the perfect all-in-one PBX solution, this IP PBX solution ease and optimize the installation while reducing the costs, a single power supply reduce the number of apparent cables.

Included in the delivery :
  • 1 x RackMatrix® 1U pre-assembled
  • 1 x 220V Power supply cable

Note : FXO/FXS/BRI/PRI modules not included (see accessories)

Support

Training details (optional)

Features
System board PC Engines APU 2
CPUAMD GX-412TC 1 Ghz Quad core
Memory2 Gb
StoragemSATA 32 Gb
E/SDB9 Serial port
2 x USB 2.0 external ports
3 x Gigabit Intel (i211AT) ports
Switch8 x PoE 10/100 Mbps ports
Power supply90 - 264V with light and fuse protection
Warranty1 year (material, return in our workshop)
Data sheet
Form factor19" 1U
Dimensions343 x 430 x 44 mm

  • OpenVox X204E Specifications

    OpenVox X204 hybrid telephony card is a PCI 2.2 compliant card which supports 4 types interface: FXO, FXS, BRI and T1/E1/ J1. X204 Series card allows users to choose the number of FXO/FXS module according to individual needs. With no additional separate channel combiner and gateway access to products, each interface access 2 analog line via junction box. BRI ports can be configured for TE or NT mode individually by jumpers. It can provide 4 simultaneous voice calls over 2 ISDN BRI lines, turns your legacy ISDN BRI equipments into powerful Voice over IP devices and provides a soft migration path from ISDN technology to the new Voice over IP world. T1/E1/ J1 interface is selectable on a per-card or per-port basis, and supports industry standard telephony and data protocols, including Primary Rate ISDN (both American and Standard Euro) protocol families for voice, PPP, Cisco, HDLC, and Frame Relay data modes. Both line-side and trunk-side interfaces are supported.

    X204 Series Card works perfectly with open source Asterisk® and enables users to take full advantages of the high performance and rich features of Asterisk®.

    Target Applications

    • Channel Bank Replacement / Alternative
    • Small Office Home Office (SOHO) applications
    • Small and Medium Business (SMB) applications
    • Gateway Termination to analog telephones/lines
    • High Performance ISDN interface Cards
    • ISDN PABX for BRI
    • ISDN LAN Routers for BRI
    • ISDN Least Cost Routers for BRI
    • ISDN Test Equipment for BRI
    • Voice-over Internet Protocol (VoIP) Services
    • Complex IVR Trees
    • "Meet-Me" Bridge Conferencing
    • Calling Card Platforms
    • VoIP Gateways (support SIP and IAX2)
    • Legacy PBX/IVR Services
    • Voice/Data Router (replace expensive routers)
    • PRI/SS7/R2 Compatibility-Network or CPE

    Technical Specifications

    • Supports PCI Express 1.0 or above
    • 4 RJ-45 interfaces on a single PCI bracket
    • Power Dissipation: 18.25W Maximum
    • Operation Temperature: 0 ~ 50°C
    • Storage Temperature: -40 ~ 125°C
    • Size: 200mm*78mm
    • Weight: 136g (with four modules)
  • Features

    T1/E1/J1 Features:

    • Industry 1st adjustable interrupt routing design
    • Interrupts frequency adjustment
    • Single PRI/E1/J1 port with PCI interface for high performance voice and data applications

    BRI Features:

    • Up to 4 Simultaneous Voice Calls Over 2 ISDN BRI Lines (Per PCIe Slot)
    • Mix TE and NT Modes as Required
    • TE/CPE mode: BRI or PRI module can be used as transceiver synchronous clock, and the clock source line does not require link to the card

    FXO/FXS Features:

    • Caller ID and Call Waiting
    • ADSI Telephones
    • Loopstart Signaling Support
    • Adjustable Interrupt Routing Design
    • Interrupts Frequency Adjustment
    • Up to 2 simultaneous PSTN Calls (Per FXO200M module)

Universal 1U case of high quality, modular, robust and rackable made by Calexium.
RackMatrix®
Patented technology providing a fully modular enclosure which adapt to all realizations.

Materials
High quality materials (Aluminium and plexiglass for the front panel and supports) ensure stability and longevity. White paint and blue powder for the cover.

Accessories