IP PBX rackable Kit, Alix 2D13, FXO/FXS
IPPBX rackable KIT, Alix 2D13, up to 4 FXO/FXS.
All the components of that kit are compliant with Asterisk distributions.
IPPBX rackable KIT, Alix 2D13, up to 4 FXO/FXS.
All the components of that kit are compliant with Asterisk distributions.
Rack case 19 inch 1U aluminium
- power supply12V 4A
- fixation kit for 19 inch bay
- fixing holes for 2,5 inch HDD
Embedded mainboard Alix 2D13
- CPU: 500 MHz AMD Geode LX800
- DRAM: 256 MB DDR DRAM
- Storage: CompactFlash socket, 44 pin IDE header
- Power: DC jack or passive POE, min. 7V to max. 20V
- Three front panel LEDs, pushbutton
- Expansion: 1 miniPCI slot, LPC bus
- Connectivity: 3 Ethernet channels (Via VT6105M 10/100)
- I/O: DB9 serial port, dual USB port
- Board size: 6 x 6" (152.4 x 152.4 mm)
- Firmware: tinyBIOS
Analog interfaces FXO/FXS (OpenVox A400M)
OpenVox A400M delivers great voice quality in the telephony systems. With interchangeable FXS/FXO modules, it can eliminate the requirement for separate channel banks or access gateways.
The A400M consists of two parts: the A400MM and the A400MS. The A400MM connects Mini PCI slot while the A400MS installs FXS/FXO modules. The A400MS contains 4 module banks. Each bank supports one analog interface. The module banks may be filled with up to 4 FXO or FXS modules enabling the creation of any combination of ports. Scaling of an analog card solution is accomplished by simply adding additional cards.
A400M works with Asterisk®, Askozia®, Elastix®, FreeSWITCH™, PBX in a Flash, trixbox®, Yate™ and IPPBX/IVR projects as well as other Open Source and proprietary PBX, Switch, IVR, and VoIP gateway applications.
Target Applications
- Channel Bank Replacement / Alternative
- Small Office Home Office (SOHO) applications
- Small and Medium Business (SMB) applications
- Gateway Termination to analog telephones/lines
Services and Features
- Caller ID and Call Waiting Caller ID
- ADSI Telephones
- Loopstart Signaling Support
Technical Specifications
- Up to 4 ports through a combination of FXS and FXO modules
- 4 RJ-11 interfaces on a single PCI bracket
- Mini PCI type III,
- Firmware accelerate I/O access to achieve high stability
- Designed for low-power systems
- Power: 1.8W Minimum, 11.6W Maximum
- Operation temperature: 0°C to 50°C
Operating Systems
- Linux (all versions, releases and distributions from 1.0 up)
RoHS compliant
Certificates: CE and FCC
Five Year Warranty!
Certified by trixbox CE and Elastix
No customer comments for the moment.
Only registered users can post a new comment.
Forum topics

